Appliance Installation
Ovens, induction and ceramic cooktops, rangehoods and dishwashers connected properly — on a circuit that can carry them, by someone licensed to do it, so the warranty stands up.
What's Involved
Supplied by you or by the retailer — we handle the connection side.
Hard-wired or plug-in, with the circuit checked to make sure it can actually carry the load before we energise anything.
Induction in particular often needs a dedicated circuit. Plenty of kitchens don't have one until we run it.
Wired, mounted and tested, including running a new point where the old hood was hard-wired into something questionable.
New points where you need them, plus checking the existing circuit isn't already carrying too much.
The Process
The spec sheet tells us the load and whether it needs a dedicated circuit — before delivery day, ideally.
We confirm the cable size and protection can handle the new appliance. Modern induction cooktops draw a lot more than what they're replacing.
Appliance connected, isolation switch fitted where required, everything secured properly.
Powered up, tested, and left clean. Paperwork provided if your warranty needs proof of licensed installation.
How We Work
Common Questions
If it comes with a fitted plug and there's a suitable dedicated outlet already there, sometimes. But hard-wired appliances legally require a licensed electrician in Queensland, and most manufacturers require licensed installation for the warranty to remain valid.
Usually yes. Induction cooktops typically draw considerably more current than the gas or ceramic unit they replace, and often need a dedicated circuit run from the switchboard. Worth checking before you buy, not after it's delivered.
Often, if we know the model in advance and the circuit is already suitable. If new wiring is needed, we'd rather do that beforehand so delivery day is straightforward.
We'll disconnect and move it out of the way. Removal from the property can be arranged — just mention it when you book.
We'll tell you before we start, quote the additional work separately, and you decide. What we won't do is connect an appliance to a circuit that can't carry it.
Where We Work
Based in Carrara, on the road daily through Nerang and the surrounding suburbs. If you're on the Coast, we can get to you.
Not on the list? Give us a ring on 0410 23 23 30 — if we can't help we'll point you to someone who can.
Also Worth A Look
Next Step
Send through the model number and we'll tell you what the connection needs before it lands on your doorstep.
Call 0410 23 23 30Get In Touch